LBH Sound

This post documents the May 2025, Little Bass Heads Big Sound System – The LBH BSS.

The BSS is designed by Michael Hatt and Ulan McKnight. In 2013, Mike designed a sound system for Ulan to bring up to Burning Man. In 2015, Ulan experienced a Klipch system deployed by Smashwolf Production and tuned by Mike …

View full post

Scotty wanted a flat-pack DJ booth. He bought a design from playatech.com. I modified it. (Thank you Hanna for the help with tabs and dowels!) Here are the results.

24-07-19 – DJ Booth (Download link) 24-07-19 – DJ Booth (File download)

View full post

TLDR: We got started with very large speakers. They weighed too much and were difficult to use. We now build smaller speakers with lots of bracing that are (relatively) light and easy to use.

When designing new speaker cabinets, we employ three engineering constraints for all of our boxes:

1) All cabinets must …

View full post

Scotty wants to build a Playatech DJ booth. I asked him to send me his plans so I can take a look. He gave me this file (DJ-Dope-Assy)

I spent a few hours in Fusion and came up with the following. I only needed 13 variables.

The DJ booth uses two sheets of 1/2″ …

View full post

I sent Mike this link I got from Deon Brown about Friendly Pressure over in England. I included the following note:

“I would like to hear your thoughts on what he is building.

3D printing the tweeter waveguide is not something I had considered. There is no reason we can’t print our own horns! …

View full post