Dec 06 2020
1) Use the new (as of 2020) “Arrange” feature in Manufacture Workspace in Fusion 360 to nest all parts for cutting. (I made a 3 minute video on how to use this feature.)
2) Edit the new setup.
A) Right click the new setup and select “Edit”
B) I always start with the third …
Permanent link to this article: https://lbhsound.com/wp/set-up-questions-and-answers-in-fusion-360/
Dec 06 2020
After over a dozen iterations, we are closing in on an overall design that is feeling good. The 3 photos below shows two of the first 4 builds along with the current 12-03-20 version.
We are using 1/2” Baltic Birch plywood and just the wood weighs in at 38lbs.
Fully …
Permanent link to this article: https://lbhsound.com/wp/getting-closer/
Dec 02 2020
Bike Party – 12-01-20 Bike Party – 12-01-20.zip
Below are some thoughts on the tool paths used to cut the Bike Party 12-01-20 file.
[T2] Score all parts
Tool: 1/4″ Down-spiral Top height: Stock top Bottom height: Stock top – .15
Why: We are using 1/2″ Baltic Birch as our stock. This plywood has …
Permanent link to this article: https://lbhsound.com/wp/tool-paths-bike-party-12-01-20/
